RUT955

RUT955

RUT955 Teltonika
RUT955

RUT955 is a highly reliable and secure LTE router with I/O, GNSS and RS232/RS485 for professional applications. Router delivers high performance, mission-critical cellular communication and GPS location capabilities. RUT955 is equipped with connectivity redundancy through dual SIM failover. External antenna connectors make it possible to attach desired antennas and to easily find the best signal location.

 

MOBILE

Mobile module 4G (LTE) – Cat 4 up to 150 Mbps, 3G – Up to 42 Mbps, 2G – Up to 236.8 kbps.
SIM switch 2 SIM cards, auto-switch cases: weak signal, data limit, SMS limit, roaming, no network, network denied, data connection fail, SIM idle protection
Status Signal strength, SINR, RSRPO, RSRQ, Bytes sent/received
Bridge Direct connection (bridge) between mobile ISP and device on LAN
SMS SMS status, SMS configuration, send/read SMS via HTTP POST/GET, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, SMPP
Black/White list Operator black/white list
Multiple PDN (optional) Possibility to use different PDNs for multiple network access and services

 

WIRELESS

Wireless mode IEEE 802.11b/g/n, Access Point (AP), Station (STA)
WiFi WPA2-Enterprise (with external/internal Radius server), WPA2-PSK, WPA-PSK, WEP, MAC Filter
WiFi security WPA2-Enterprise - PEAP, TLS, TTLS. AES-CCMP, TKIP, Auto Cipher modes. Client separation
SSID SSID stealth mode and access control based on MAC address
WiFi users up to 100 simultaneous connections
Hotspot Captive portal (Hotspot), internal/external Radius server , built in customizable landing page
ETHERNET
WAN 1 x WAN (can be configured to LAN) 10/100 Mbps, comply IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX
LAN 3 x LAN ports, 10/100 Mbps, comply IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX

 

NETWORK

Routing Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2)
Network protocols TCP, UDP, IPv4, IPv6, ICMP, UDP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP, MQTT
VoIP passthrough support H.232 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets
Connection monitoring Ping Reboot, Periodic Reboot, LCP and ICMP for link inspection
Firewall Port forward, traffic rules, custom rules
DHCP Static and dynamic IP alocation
QoS Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e
DDNS Supported >25 service providers, others can be configured manually
Network backup VRRP, Mobile, Wired and WiFi WAN options, each of which can be used as backup
Load balancing Balance your internet traffic over multiple WAN connections
NetSnapper (optional) Mobile connection management, data compression VPN client (not available in standard FW)
SSHFS (optional) Possibility to mount remote file system via SSH protocol (not available in standard FW)

 

SECURITY

Authetication Pre-shared key, digital certificates, X.509 certificates
Firewall Pre-configured firewall rules can be enabled via web-ui, unlimited firewall configuration via CLI; DMZ; NAT; NAT-T
Atack prevention DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention ( SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)
WiFi security WPA2-Enterprise - PEAP, TLS, TTLS. AES-CCMP, TKIP, Auto Cipher modes. Client separation
VLAN Port based and tag based VLAN separation
Mobile quota control Set up custom data limits for both SIM cards
WEB filter Blacklist for blocking out unwanted websites, whitelist for specifying allowed sites only
Access control Flexible access control of TCP, UDP, ICMP packets, MAC address filter

 

VPN

OpenVPN Multiple clients and server can be running simultaneously, 12 encryption methods
OpenVPN Encryption DES-CBC, RC2-CBC, DES-EDE-CBC, DES-EDE3-CBC, DESX-CBC, BF-CBC, RC2-40-CBC, CAST5-CBC, RC2-64-CBC, AES-128-CBC, AES-192-CBC, AES-256-CBC
IPsec IKEv1, IKEv2, supports up to 4x VPN IPsec tunnels (instances), with 5 encryption methods (DES, 3DES, AES128, AES192, AES256)
GRE GRE tunnel
PPTP, L2TP Client/Server services can run simultaneously

 

MONITORING & MANAGEMENT

WEB UI HTTP/HTTPS, status, configuration, FW update, CLI ,troubleshoot, event log, system log, kernel log
FOTA Firmware update from server, automatic notification.
SSH SSH (v1, v2)
SMS SMS status, SMS configuration, send/read SMS via HTTP POST/GET
TR-069 OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVsystems
MQTT MQTT Broker, MQTT publisher
SNMP SNMP (v1, v2, v3), SNMP trap
JSON-RPC Management API over HTTP/HTTPS
MODBUS MODBUS TCP status/control
RMS Teltonika Remote Management System (RMS)

 

SYSTEM CHARACTERISTICS

CPU Atheros Wasp, MIPS 74Kc, 550MHz
RAM 128MB, DDR2
FLASH memory 16MB SPI Flash

 

FIRMWARE / CONFIGURATION

WEB UI Update FW from file, check FW on server, configuration profiles, configuration backup, restore point
FOTA Update FW/configuration from server
RMS Update FW/configuration for multiple devices
Keep settings Update FW without losing current configuration

 

FIRMWARE CUSTOMIZATION

Operating system RutOS (OpenWrt based Linux OS)
Supported languages Busybox shell, Lua, C, C++
Development tools GPL package with built environment provided

 

LOCATION TRACKING

GNSS GPS, GLONASS
Coordinates GNSS coordinates via WebUI, SMS, TAVL, RMS
NMEA NMEA 0183
NTRIP NTRIP protocol (Networked Transport of RTCM via Internet Protocol)
Server software supported server software TAVL, RMS
Mobile Network Geolocation Location without using GPS, get approximate location based on mobile tower on RMS

 

SERIAL

RS232 DB9 connector, full RS232 (with RTS,CTS)
RS485 RS485 Full Duplex (4 wires) and Half Duplex (2 wires). 300-115200 baud rate
Serial functions Console, Serial over IP, Modem, Modbus gateway, NTRIP Client

 

INPUT/OUTPUT

Input 3 x Input (0 - 3 V digital input / 0 - 30 V digital galvanically isolated input / 0 - 24 V analog input)
Output 2 x Output (30 V, 250 mA digital open collector output / 40 V, 4 A SPST relay output)
Events SMS, EMAIL, RMS

 

USB

Data rate USB 2.0
Applications Samba share, custom scripts
External devices Possibility to connect external HDD, flash drive, additional modem

 

SD CARD

Physical size Micro SD
Aplications Samba share, custom scripts
Capacity Up to 32GB

 

POWER

Connector 2 pin industrial DC power socket
Input voltage range 9 – 30 VDC (2 pin industrial socket, 5mm pin pitch), reverse polarity protection, voltage surge/transient protection
PoE (passive) Passive PoE over spare pairs. Possibility to power up through LAN port, not compatible with IEEE802.3af and 802.3at standards
Power consumption < 2W idle, < 7W Max.

 

PHYSICAL INTERFACES (PORTS, LEDS, ANTENNAS, BUTTONS, SIM)

Ethernet 4 x RJ45 ports, 10/100 Mbps
Status LEDs 1 x bi-color connection status LED, 5x connection strength LEDs, 4x LAN status LEDs, 1x Power LED
SIM 2 x SIM slots (Mini SIM - 2FF, 2st form factor), 1.8V/3V
Power 2 pin industrial DC power socket
Input/output 10 pin industrial socket for inputs/outputs:
Anntenas 2 x SMA for LTE, 1 x SMA for GNNS, 2 x RP-SMA for WiFi antenna connectors
USB USB A socket for external devices
SD card Micro SD card slot
RS232 DB9 socket for full-featured RS232
RS485 6 pin industrial socket for 2/4 wire RS485
Reset Reset/restore to default button

 

PHYSICAL SPECIFICATION

Casing material Aluminium housing, plastic panels
Dimensions 80 mm x 106 mm x 46 mm (H x W x D)
Weight 280 g
Mounting options DIN rail (can be mounted on two sides), flat surface placement

 

OPERATING ENVIRONMENT

Operating temperature -40 °C to 75 °C
Operating humidity 10% to 90% non-condensing
Ingress Protection Rating IP30
MTBF 230000 h

 

REGULATORY & TYPE APPROVALS

Regulatory CE/RED, FCC, R&TTE, EAC, PTCRB (in progress) RoHS, WEEE
Operator AT&T, Verizon (planned)
Vehicle ECE approval mark, e-mark (E26) Regulation No. 10 R, Amendment 05, Supplement 01, SAE J1455 Revised AUG94

 

EMI IMMUNITY

Immunity EN 55024:2010
Radio disturbance EN 55022:2010
ESD EN 301 489 V2.1.1 (EN61000-4-2:2009)
RF EN 301 489 V2.1.1 ( EN 61000-4-3:2006, A1:2008 and A2:2010)
EFT EN 301 489 V2.1.1 (EN 61000-4-4:2013)
Surge protection EN 301 489 V2.1.1 (EN 61000-4-5:2014)
RC EN 301 489 V2.1.1 (EN 61000-4-6:2014)

 

ENVIRONMENTAL TESTING

Anti-shock/Drop/Vibration IEC 60950-1:2005 (Second Edition) + Am 1:2009 + Am 2:2013, EN 60950-1:2006 + A1:2010 + A2:2013 + A11:2009 +A12:2011, DNVGL-CG-0339:2016, Class A - Section 3, Article 6; EN 60068-2-6:2008
Impact strength IEC 60950-1:2005 (Second Edition) + Am 1:2009 + Am 2:2013, EN 60950-1:2006 + A1:2010 + A2:2013 + A11:2009 +A12:2011

Ask a question about this item

RUT955